Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

Willworx Superstand Bike Stand
$44.98
- Shop quality bicycle display and storage stand - Graphite ripple powdercoat over steel construction - Four-Point, Foam rubber end-Cap feet - 2 Piece design disassembles for space-Efficient storage - Standard and extreme models feature welded base construction (Extreme model accepts up to 3 inch tires) - Retail model features flat-Packed, Bolt-Together base construction - Fat rack features flat-Packed, Bolt-Together base construction and will suit tires from 3.8" To 5" with three width positions, 4.25", 4.75" And 5.25"
Wheels Manufacturing BB30 ABEC-3 Bearings & Clip Kit for SRAM DUB Cranks
$49.98
BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.
Wheels Manufacturing Dropout Saver Kit
$70.00
The dropout saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads, install a dropout saver, and realign the dropout. Kit includes: - (1) 15/32-inch reduced shank drill bit - (2) DS-1 wide dropout savers     - (3) DS-2 narrow dropout savers    
Wald 3133 Q-R Basket
$39.98
This versatile basket is based on Wald's popular 133 basket but uses a holder that bolts onto your handlebar. The holder offers greater clearance between the bar and basket for shifters, cables, and brake levers. Available in white (3133WH) or gloss black (3133GB) powder coat finishes. - Made in U.S.A. (Maysville, KY) - A Quick Release Basket with Bolt-on Holder for stable installation and use - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14.5 x 9.5 x 9 inches; the basket tapers to 12.25 x 7 inches at the bottom - Holder designed to fit 7/8", 1" and 31.8mm diameter handlebar - Handlebar clamps are 2" apart and offer clearance for shift and brake cables - Powder Coat Finish - Complete basket including the holder weighs 3 lbs.
Wald Wald Training Wheels 10252
$44.98
Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.
Wald Wald Training Wheels 1216
$39.98
Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.
TwoFish Twofish Quick Cage
$39.98
- Stainless steel cage with 24 ounce screw top bottle - Cage Velcros on any size frame tube or seat post
Tubus Roundstay
$9.98
Replacement stays for a variety of Tubus racks. Every roundstay is made out of solid aluminum, and they are available in various lengths and offsets. - 8mm diameter stay - Drilled for M5 bolts
Tri-Flow Superior Lube
$9.98 - $18.98
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
Topeak Explorer 29er Tubular Rack w/Disc Mounts
$59.95
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap onto your big-wheeled bike. It's made of tubular aluminum, fits most bikes with disc brakes, hauls up to 55 pounds and has a center strip that acts like a short fender. It's compatible with Topeak's QuickTrack bags and accessories (sold separately), too.
Topeak Explorer Tubular Rack w/Disc Mounts and Spring
$59.95
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too. Plus, it comes with a spring that folds up to clamp securely onto books, magazines and other thin objects.
Topeak MTX BeamRack
$69.95
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
Topeak Mini 6
$14.95 $16.95 12% Off
Topeak's Mini 6 is a great way to take along the essentials in a tidy and super-light package! Its forged-aluminum body includes: 2, 3, 4, 5 and 6mm Allen wrenches, and a Phillips screwdriver.
Topeak Prepstand ZX
$148.98
This simple and easy-to-use workstand does not require any mounting or clamping action which may scratch or damage your bike seat tube surface or seatpost. Just lift your bike, hang seatpost or seat tube on the arm of bike holder, and lift up rear wheel for bike maintenance and adjustments. Optional tool tray holds tools and small parts close for easy access. - Holder Head Hard rubber jaws - Holder Height 80 cm to 108 cm / (31.5” - 42.5”) - Attachments Attaches to seat tube or seatpost with front wheel on the floor
Topeak TubiBooster X
$99.95
An aluminum air chamber with inflator head that stores an air charge of one liter, up to 200psi / 14 bar. Works with a floor pump to quickly fill your tires and ensures proper installation on a tubeless rim at home. Once you flip the selector from "CHARGE" to "INFLATE" mode, air bypasses the chamber as you use the floor pump to inflate your tire to the perfect pressure. An integrated flexible hose with pump head works with Presta and Schrader valves and takes stress off the valve stem while pumping. - Pump Head Compatibility: Presta pumps - Tire Valve Compatibility: Presta / Schrader valves - Air Chamber: One liter, Store up to 200psi / 14 bar air pressure (Varies with the pump capacity) Working Pressure - 1800psi / 124 bar - Material: Aluminum / Rubber / Engineering grade polymer - Flexible hose - Weight: 985g / 2.17oz (Total) 820 g / 1.81lb (Air chamber) - Hose Length: 26 Size - 36 x 11.4 x 8.6cm / 14.2" x 4.5" x 3.4" (Total) - 28.5 x 8.1cm / 11.2" x 3.2" (Air chamber)
Timber MTB Timber 3.0 Bolt-On
$24.98
Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. If you find yourself using your bell on nearly every ride, then the Bolt-On model is the one for you. The Timber 3.0 Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2mm shim for mounting your bell securely near your grips, closer to your hands (you'll want to use this setup for oversize and DH bars). - Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.
Timber MTB Timber 3.0 Quick-Release
$24.95
The original model of our mountain bike bell, Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. It includes two separate o-rings to fit all handlebar sizes and is easy to move between bikes. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life. - We've also upgraded the backing pad to a much grippier rubber that prevents the bell from movement while shifting between ring modes. The new pad is much more durable than the old pad and won't wear out.
TerraTrike Boost Kit (Bosch) - 20
$2,598.98
Turn your TerraTrike* into an E-Trike with our Boost Kit. Powered with Bosch's ActiveLine Plus Mid Drive Motor, PowerPack 400Wh Lithium-Ion battery, and Purion console, you'll enjoy the added assist an e-trike can provide. Boost Kits are required to be installed by a local authorized dealer. Contact us for more details. The Boost Kit Includes: - Bosch ActiveLine Plus Mid Drive Motor - Bosch PowerPack 400Wh Battery - Purion Console - Crank Arms (No Pedals) - Boom *The Boost Kit - 20" is compatible with the following current TerraTrike models when equipped with 20" front wheels: - Maverick - Rogue - Rambler - Gran Tourismo - Traveler
TerraTrike Chain Gobbler 2 (for E.V.O. - Bosch)
$179.98
Do you share your TerraTrike E.V.O. - Bosch with other riders? The Chain Gobbler 2 for E.V.O. - Bosch lets you adjust the boom length to the perfect fit for each rider within seconds and without tools.  The installation kit includes frame plate, boom plate, chain idlers, quick release levers and all other hardware needed. - Easily takes up or pays out chain - Allows for boom adjustment from large to small - Fits the Rambler E.V.O. - Bosch model - Compatible with other TerraTrikes with the Bosch Boost Kit installed (Traveler, Rambler and Gran Tourismo)
TerraTrike Chain Gobbler 3
$109.98
Why sacrifice comfort and performance when a TerraTrike is shared amongst multiple riders? Use the Chain Gobbler 3 to adjust your trike's boom length to the perfect fit within seconds and without tools. This kit includes brackets, chain idlers, quick release levers and all other hardware needed.
  • Easily takes up or pays out chain
  • Allows for boom adjustment anywhere from large to small
  • Fits all Maverick, Rogue, Traveler, Gran Tourismo, and GTS models
  • Fits all Rambler models except those with crossbow style frames
  • Not compatible with Sportster or Spyder models
  • Not compatible with the Bosch Boost Kit
TerraTrike Teardrop Flag
$49.98
Be seen with this highly visible teardrop style flag. Made from very sturdy nylon fabric with reflective edging and features bold graphics and colors. Each flag measures 36" x 9" and comes with a 48" flag pole with flag clip. These flags are a great way to stylize your trike (or bike) and make yourself visible to others. - Teardrop-shaped flag: Tiger Stripes - Large and highly visible - Easily slides into the seat mesh grommet
TerraTrike Wide Seat Frame - Fixed Mount
$149.98
Get another 2” of width over stock TerraTrike seats by upgrading to this direct stock replacement. This frame adds the cockpit room you need to make your ride even more enjoyable. When paired with the Wide Handlebars (sold separately), this combo offers the perfect solution for adding seating space to your TerraTrike.
  • Compatible with all trikes with a fixed seat attachment (2017 & later)
  • 2" wider than stock seat frame
  • Added comfort for longer rides
  • Requires Wide Seat Mesh (TT000461)
  • Recommended add on: Wide Handlebars (TT000368)
Swagman X Mount
$51.50
Swagman brings you a brilliant tool for storing your hitch-mount bike rack when it's not attached to your hitch. The X Mount can be attached to any wall to create a virtual hitch. Just mount the rack like you would on your car or truck, and fold the rack up against the wall to get it out of the way. When you're not using it, the X Mount itself will even fold against the wall, creating an even lower profile. - Fits 2-inch receiver style bike racks and 2-inch receivers with 1-1/4-inch universal adapter. - Stores bike rack when not in use - Folds against wall when not in use
Sunlite Adjustable Rear Mount Kickstand
$21.98
• Self locking rear mount design • Fully adjustable length for 26" to 29" wheels • Alloy construction
Sunlite Gold Tec Disc Rack
$39.98
Sunlite's Gold Tec Disc Rack fits almost any disc brake-equipped bike with wheel sizes of 26-inch, 27-inch, and 700c. Made from lightweight tubular aluminum, the Disc Rack is durable enough for daily commutes and light enough for long tours. The top deck has a capacity of up to 50 pounds and side struts support rear panniers.
Sunlite Gold Tec Strut Kit
$11.98
- Hardware included - Fits all Sunlite Gold-Tec racks - Cut to length
Sunlite RackPack Medium w/Side Pockets Bag
$77.98
- Large padded main compartment with 2 internal mesh pockets - Two side zippered compartments - Rear accessory compartment - Top tie-down strap - Expandable top - Includes removable shoulder strap - Velcro mounting straps - Bag volume: 800 c.i. - Size: 12.6x5.5x6.7"
Sunlite Utili-T Rack Bag 1
$59.98
Sunlite's Utili-T Rack Bag 1 gives you some much needed cargo space. It attaches to most rear rack tops quickly and easily. A large single compartment lets you haul larger items with ease and a shoulder strap lets you go from bike to office is one fell swoop. The bag is made from water-resistant 600-denier polyester and uses heavy-duty zippers and reflective accents throughout.
Sunlite Willow Classic Basket
$25.98
Sunlite's Willow Classic Basket attaches to your handlebars via leather handlebar straps and buckles so it will be ready for a spontaneous jaunt to the park! The tightly-woven willow ensures small items stay in the basket, and the cool design is sure to elicit compliments.
No Image
$29.98
- Timeless woven wood basket with clear coating for improved durability - Classy real leather straps with buckles - Material: Beech Wood, Dark Brown - Size (WxLxD): 13x8.5x10" - Weight Limit: 11lbs
Page 1 of 7 Next page