Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Wolf Tooth Components Rear Boostinator
$39.98
Boostinator kits allow non-boost wheels to be mounted in Boost spacing frames and forks. While incremental, the benefits of the "Boost" 15x110mm front and 12x148mm rear axle standards are clear: better clearance for fatter tires & rims and reduced dish for stiffer, stronger wheels. The big bummer? Taking full advantage requires not only a new frame and fork, but new wheels as well. In response, we have developed the Boostinator. When paired with compatible 15x100mm or 12x142mm hubs, Boostinator kits allow existing wheels to be mounted in Boost-standard frames and forks. Disc and drivetrain positions are maintained and, thanks to a quick re-dish, spoke bracing angles are improved. Boostinator kits consist of a specially-designed axle end cap and, in the case of rear kits, a precision-machined rotor spacer with a set of six high-strength bolts. In keeping with Boost specifications, the disc and cassette are shifted outboard, allowing brakes and derailleurs to function as designed. Compatibility: - Front boostinators are only an endcap and do not require a rotor spacer. The wheel is re-dished. - Rear boostinators require both a re-dish and rotor spacer. - Rear Boostinator kits are not approved for rotors larger than 183mm. - Hubs spacing is 100mm front and 142 rear, and the Boostinators make them 110 and 148 respectively. - Compatible with 6-bolt FRONT wheels and SOME centerlock models. - Compatible with ONLY 6-bolt REAR wheels (there is no way to space centerlock rotors over 6mm). - NOT recommend (or safe) for non-symmetric lacing like the 2:1 lacing found on some of Industry Nine's wheels. *Note: You will need to re-dish your wheel after installing any Boosinator. Boostinator DR: - The Boostinator DR is compatible with DT-Swiss 12x142mm Star Ratchet (240- and 350-series) rear hubs with 6-bolt (IS) rotor mounts. - Centerlock hubs are not supported. - 180- and 190-series hubs are Centerlock only. - The Boostinator DR is also compatible with some complete wheels from DT Swiss, Roval (Specialized), Giant, Syncros (Scott), and others that use DT's Star Ratchet internals. - Remove the disc side end cap. Bearing size 6802 15x24. - Net weight: 18g Boostinator HR: - The Boostinator HR is compatible with 12x142mm Hope Pro 2 EVO and Pro 4 rear hubs. - Non-EVO Pro 2 hubs are not supported - Net weight: 18g Boostinator 9TR: - Compatible with 142x12 rear Industry Nine Torch hubs. - Not compatible with 2:1 lacing wheels from Industry Nine - Not compatible with Centerlock hubs Tech Specs: - Material: 6061 aluminum - Included: Rear kits come with appropriate-length Class 10.9 bolts, each roughly 40% stronger than more common Class 8.8 hardware.
Wheels Manufacturing Inc. Outer Axle Nut
$1.50
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
WTB KOM Light 29-inch
$99.98
WTB's proprietary 4D spoke drilling prevents binding and lateral loading of the spokes, while the spoke bed itself has been updated to provide a more compatible interface between the spoke and rim. Integration of the all-new Solid Strip on our TCS 2.0 rims delivers the easiest to mount and most reliable tubeless system we’ve ever made. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area
WTB TCS AL 46mm Presta Valve
$25.98
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 46mm
The Wheel Shop Alex C1000/Shimano Acera FH-T3000 26-inch Rear
$54.98
- Position Rear - Wheel Diameter/ISO 26'' / 559 - Axle Type QR - Hub Spacing 135mm - Wheel-Brake Comp. Rim - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Single wall - Rim Internal Width 19.9mm - Rim inner width range 0-21.9mm - Rim Color Silver - Rim Drilling 36 - Hub Model Shimano Acera FH-T3000 - Wheel Weight - - Spoke Type Steel - Valve Schrader - Rim External Width 25.2mm - Depth 16mm - Rim Model Alex C1000 - Skewers Included Yes
Stan's NoTubes Threaded Valve Extenders
$26.00
Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal.
Sta-Tru 700c Rear Wheel
$44.98
Sta Tru Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 622 / road / 29" - Tire Type: Clincher - Rear Axle: QR x 130mm
Origin8 Bolt Alloy MTB+ Rim 27.5-inch
$79.98
- AL6061-T6 alloy constuction - Post-production anodized in a sanded gloss black finish - Tubeless ready - Disc brake only - Pinned joint - ISO-Mountain certified - ISO: 584 - Profile: 18 - Wall: Dbl - Side: Disc - Valve: PV - ERD: 564 - Tire Compatibility: Tubeless Compatible 40mm Width: - Width ID: 35 - Width OD: 40 - Weight: 560g 45mm Width: - Width ID: 40 - Width OD: 45 - Weight: 650g 50mm Width: - Width ID: 45 - Width OD: 50 - Weight: 730g
Origin8 Bolt Alloy Road Wheelset
$407.99
- Origin8 Bolt high profile AL6061-T6 alloy tubeless ready clincher with sleeved joint and post-anodized sanded gloss black finish - Origin8 Elite road hubs with anti-bite Shimano cassete body featuring 6 pawl/48 point/7.5-degree engagement - 20 hole QR front/24 hole QR rear road hubs laced with J-bend DT Swiss Competition spokes - Weight: 718g front/895g rear - ISO-Road certified and assembled in the USA - Width ID (mm): 17 - Axle: QR - Rim Color: Blk - Rim Model: OR8 Bolt Alloy Road - Hub Model: OR8 RD-1110 Elite Road - O.L.D.: 100mm/130mm - Hub Color: Blk - Gears: 8-11s Cass - Brake Type: Rim - Spoke Type: DT-2.0/1.8 BK - Spoke Count: 20F/24R - Wall: Dbl - Valve: PV Type: Tubeless Compatible
Origin8 Tubeless Alloy Presta Valve
$20.98
- AL6061 alloy tubeless Presta valve - Includes 2 O-rings, one standard profile and one aero profile, for an airtight seal on any rim - Removable valve core for installing sealant - Additional replacement valve cores sold separately - Sold individually
Giant AM 27.5 Disc Rear MTB Wheel
$220.00
- Disc brake only - Sealed bearing hubs - 30mm Tubeless Ready rim - Does not include axles, tape, or tubeless components
Giant On-Road Trainer Rear Thru-Axle
$47.00
Your riding doesn’t need to stop when the weather gets cold. Features - Giant road thru-axle trainer axle - Alloy construction - For use on 2017+ Giant road bikes with a 142x12mm rear thru-axle
DT Swiss 350 Road Rear Hub
$223.98
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
DT Swiss FR 560 26-inch
$134.98
A 30mm welded rim, developed for the big gaps, nasty root mats, and mean rock gardens. The FR 560 was made to withstand the nastiest of rock gardens, the roughest of roots, and the sketchiest of landings. The prototype proved to be World Championship material, and the final product is now available for you to shred as hard as you want. Available as a classic 26", a modern 27.5", and a 29" wagon wheel. The 30 mm inner rim width provides your tires with the support they need to roost through the berms at full speed.
DT Swiss M 502 27.5-inch
$99.98
A sleeved AM rim, supporting modern tires with its 30mm inner width. Just wide enough, just light enough. With a 30mm internal rim width, the M 502 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest of terrains. DT Swiss's benchmark rim material is combined with an economic sleeve-junction to offer the best ratio between low weight, big width, and a low price.
DT Swiss M 502 29-inch
$99.98
A sleeved AM rim, supporting modern tires with its 30mm inner width. Just wide enough, just light enough. With a 30mm internal rim width, the M 502 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest of terrains. DT Swiss's benchmark rim material is combined with an economic sleeve-junction to offer the best ratio between low weight, big width, and a low price.
DT Swiss Pro Lock Aluminum Nipples
$38.99
The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - Weight: starting at 20g for 64 nipples
DT Swiss Tubeless Ready Rim Tape
$23.98
DT Swiss tubeless-ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type setups. - Durable adhesive tape works as a rim tape and airseal
Page 1 of 1